Inspirating Info About How To Check Steering Head Bearings
![How To Inspect, Install, Adjust, And Upgrade Steering Head Bearings - Revzilla](https://i.ytimg.com/vi/_Ozfh93CvBs/sddefault.jpg)
Loose, tight, or worn steering head bearings are going to impact your bike’s steering and handling, and not in a good way.
How to check steering head bearings. Check both bearings and bearing races. So i disassembled everything, figuring i may as well change the fork oil so i knew everything was good, and i found everything, including the fork oil to be just fine. How to adjust and lubricate the steering head bearings on a harley touring or road king.
Common symptoms of bad steering head bearings include poor steering feel, strange resistance, clunking from the front. The orange stuff on the lower bracket and. Another of the new 'basic skills' family of short videos, here i'm showing how to check the steering head or 'head stock' bearings on a motorcycle and also t.
But i can tell you that it is most likely the pads shifting back and forth a little. A quick and simple explanation and demonstration of how to check your steering head bearings for wear and/or looseness Then, have a friend weight the rear of.
Now the handlebars are moved about 30 millimeters to the left and right with two fingers (see photo show) and light. To do this, the machine can be carefully tilted to the left over the side stand. To check your bearings, use a lift, or put your bike on its center stand.
The only requirement is that you get the front wheel off the ground. On page 2.4 of my service manual for my 2017 fltrx (no s with it, just fltrx a plain jane model) for the maintenance schedule it states about halfway down on the check list. Mine where in decent order and had even some grease left in them.